How do you troubleshoot an electric golf cart motor?
There are a few simple problems that you can fix yourself that will not necessitate professional maintenance.
- Test the wall socket where you charge your cart. …
- Expose your golf cart batteries. …
- Test the batteries for voltage. …
- Replace dead batteries. …
- Expose the motor for inspection. …
- Reset the motor. …
- Test the cart.
How do you reset a golf cart electric motor?
First, you’ll want to reset your motor.
It should have a small reset button (Usually it will be red) located near the main battery supply. Hit the reset button and then put the cover back on the motor. The next step would be to recharge your cart and try turning it on again.
How do I reset my club car motor?
Easily Reset the Club Car Golf Cart OBC
- Key switch to off.
- Set forward/reverse to neutral.
- Put tow/run switch to tow.
- Disconnect the negative battery terminal from the battery pack.
- Put the tow/run switch to run.
- Put forward/reverse switch to reverse.
- Put key switch to on.
How do I know if my club car OBC is bad?
How do I know if my OBC is NOT working properly? If you plug in the charger and no click is heard the problem is either that the battery voltage is too low (less than 35 DC volts) or there is a problem with the OBC or a fuse. The only other reason the relay will not click is if it is a bad relay (a failed “open coil”).
How do I know if my club car controller is bad?
X Common Symptoms of Controller Failure
- Top Speeds Not Appropriate for Your Cart. Golf carts are designed to reach pretty specific speeds and to not go over them or beneath them. …
- Sudden and Unexpected Slowing. …
- Shuttering or Shaky Driving. …
- Stalling Out and Refusing to Start. …
- Surges in Speed When Driving.
How do I know if my golf cart motor is bad?
You have enough going on in your life without your golf car refusing to start when you turn the key in the ignition. If your golf car won’t start, is slower than it used to be, or is experiencing other technical problems, you could have a bad motor on your hands.
Identify your main battery supply (usually the largest battery) on your motor. Check around this supply for a small red button that may or may not be labeled “Reset”. Press and hold this button for a few moments and then release it to reset the motor.
How do you test a solenoid on a club car?
Turn on the engine of the cart and press the pedal downwards. If you hear a clicking sound, then it means that the low side voltage is working. But, if there is no such sound, it means that either there is no low side voltage or there is a problem with the solenoid. Use a voltmeter and engage the solenoid.
What happens when an electric motor burns out?
When a motor burns out, a short circuit occurs in the windings and the motor ceases to turn. You can test for a short circuit by checking the resistance of the windings with an ohmmeter; a reading of 0 ohms (Ω) indicates a short.
What are the symptoms of a bad solenoid in a golf cart?
The main sign of an issue in an electric cart is a lack of any “click” noise at all when you turn on your cart’s ignition. Usually, you’ll be able to hear the solenoid clicking both on and off whenever you switch your ignition.