Best answer: What are the giant smokestacks at nuclear power plant for?

In the heat cycle for a nuclear power plant, an ultimate heat reservoir is required. … These cooling towers take hot water from the nuclear reactor’s condenser system and circulate it through a cold air draft found at the bottom of the tower along the inlet plenum.

Why do power plants have smokestacks?

A smokestack, stack, or chimney is a tall vertical pipe or channel used by power plants to exhaust combustion gases into the air. This height disperses pollutants over a wider area in order to minimize their impact. … Also, by building stacks higher than inversion layers the gas can be dispersed even more effectively.

What are the towers for at a nuclear power plant?

Just the Facts:

Cooling towers are constructed for plant cooling and to protect aquatic environments. The nuclear reactor is located inside a containment building, not the cooling tower. The cloud at the top of cooling tower is not radioactive.

What are the big chimneys at power plants?

So what are these enormous concrete monstrosities? These belching behemoths are cooling towers. In the UK’s creaking, outdated power stations coal is burnt to heat water to steam. The steam is sent through turbines at high speed generating electricity.

IT\'S FUNNING:  Why hydroelectric is efficient?

What are smokestacks used for?

Smokestacks are chimneys needed for factories that burn fossil fuels, such as coal, in order to create steam to power generators in order to create electricity for the factory’s purpose, such as with a coal plant.

What are smokestacks made of?

Smokestack Smoke and Air Pollution

Fine particles come from burning fuels such as wood, oil, natural gas, gasoline and coal. Noxious gases include sulfur dioxide, nitrogen oxides, carbon dioxide, carbon monoxide and chemical vapors. Ground-level ozone results from urban smog reacting in sunlight.

Do cooling towers pollute?

Yet despite the familiarity we have with them, knowledge about what a cooling tower actually does remains limited. A common misconception is that they release pollution. In fact, what they actually release is water vapour – similar to, but nowhere near as hot, as the steam coming out of your kettle every morning.

Did Chernobyl have cooling towers?

The existing reactors of the power plant had no cooling towers because they cooled the condenser with water from the Pripyat river in open-cycle. … The diameter of the almost finished tower is 120 meters, its height is about 150 meters. Eventually the Chernobyl disaster stopped all works around the site in 1986.

Do nuclear power plants have chimneys?

Yes, some nuclear power plants have tall, concrete chimneys. … Power plants permitted after NEPA typically had cooling towers to reduce the amount of water drawn from the nearby lake, river, or ocean and to also reduce the amount of thermal pollution discharged from the plants back into those bodies of water.

IT\'S FUNNING:  How much does electricity cost in Quebec?

Where is the world tallest chimney?

The reinforced concrete chimney is about 38 metres (125 ft) taller than the Inco Superstack in Sudbury, Ontario, Canada. It is the tallest chimney ever built.

Ekibastuz GRES-2 Power Station
Wikimedia | © OpenStreetMap
Country Kazakhstan
Location Ekibastuz

What are giant chimneys for?

Use. Although many kinds of industrial facilities have tall chimneys most of the chimneys with heights of 200 metres and more are part of thermal, especially coal-fired power stations. Only a few smelters, steel mills, chemical factories and oil refineries use such tall chimneys.

How tall are the Oswego smoke stacks?

These stacks are about 700 feet high. The tall stacks improved Oswego’s air but the building of such stacks across the country had the unintended consequence of producing acid rain far away from the power plants.